Curved domain walls dynamics driven by magnetic field and electric current in hard ferromagnets

The propagation of curved domain walls in hard ferromagnetic materials is studied by applying a reductive perturbation method to the generalized Landau–Lifshitz–Gilbert equation. The extended model herein considered explicitly takes into account the effects of a spin-polarized current as well as those arising from a nonlinear dissipation.     

Robust multilevel methods for quadratic finite element anisotropic elliptic problems

This paper discusses a class of multilevel preconditioners based on approximate block factorization for conforming finite element methods employing quadratic trial and test functions. The main focus is on diffusion problems governed by a scalar elliptic partial differential equation with a strongly anisotropic coefficient tensor. The proposed method provides a high robustness with respect to non‐grid‐aligned anisotropy, which is achieved by the interaction of the following components: (i) an additive Schur complement approximation to construct the coarse‐grid operator; (ii) a global block (Jacobi or Gauss–Seidel) smoother complementing the coarse‐grid correction based on (i); and (iii) utilization of an augmented coarse grid, which enhances the efficiency of the interplay between (i) and (ii). The performed analysis indicates the high robustness of the resulting two‐level method. Moreover, numerical tests with a nonlinear algebraic multilevel iteration method demonstrate that the presented two‐level method can be applied successfully in the recursive construction of uniform multilevel preconditioners of optimal or nearly optimal order of computational complexity. Copyright © 2013 John Wiley & Sons, Ltd.     

Time domain simulation of vortex-induced vibrations in stationary and oscillating flows

This paper focuses on the further development of a previously published semi-empirical method for time domain simulation of vortex-induced vibrations (VIV). A new hydrodynamic damping formulation is given, and the necessary coefficients are found from experimental data. It is shown that the new model predicts the observed hydrodynamic damping in still water and for cross-flow oscillations in stationary incoming flow with high accuracy. Next, the excitation force model, which is one component of the total hydrodynamic force model, is optimized by simulating the VIV response of an elastic cylinder in a series of experiments with stationary flow. The optimization is performed by repeating the simulations until the best possible agreement with the experiments is found. The optimized model is then applied to simulate the cross-flow VIV of an elastic cylinder in oscillating flow, without introducing any changes to the hydrodynamic force modeling. By comparison with experiment, it is shown that the model predicts the frequency content, mode and amplitude of vibration with a high level of realism, and the amplitude modulations occurring at high Keulegan–Carpenter numbers are well captured. The model is also utilized to investigate the effect of increasing the maximum reduced velocity and the mass ratio of the elastic cylinder in oscillating flow. Simulations show that complex response patterns with multiple modes and frequencies appear when the maximum reduced velocity is increased. If, however, the mass ratio is increased by a factor of 5, a single mode dominates. This illustrates that, in oscillating flows, the mass ratio is important in determining the mode participation at high maximum reduced velocities.     

Cramer’s rule over residue class rings of Bézout domains

Cramer’s rule over residue class rings of Bézout domains is given.     

Issue Information

Three‐dimensional direct numerical simulation results of flow past a circular cylinder are influenced by numerical aspects, for example the spanwise domain length and the lateral boundary condition adopted for the simulation. It is found that inappropriate numerical set‐up, which restricts the development of intrinsic wake structure, leads to an over‐prediction of the onset point of the secondary wake instability (Re_cr). A best practice of the numerical set‐up is presented for the accurate prediction of Re_cr by direct numerical simulation while minimizing the computational cost. The cylinder span length should be chosen on the basis of the intrinsic wavelength of the wake structure to be simulated, whereas a long span length is not necessary. For the wake transitions above Re_cr, because the wake structures no longer follow particular wavelengths but become disordered and chaotic, a span length of more than 10 cylinder diameters (approximately three times the intrinsic wavelength) is recommended for the simulations to obtain wake structures and hydrodynamic forces that are not strongly restricted by the numerical set‐up. The performances of the periodic and symmetry lateral boundary conditions are compared and discussed. The symmetry boundary condition is recommended for predicting Re_cr, while the periodic boundary condition is recommended for simulating the wake structures above Re_cr. The general conclusions drawn through a circular cylinder are expected to be applicable to other bluff body configurations. Copyright © 2017 John Wiley & Sons, Ltd.     

方差可能无穷的“中度偏离”单位根过程的复合分位数估计

考虑一类"中度偏离"单位根过程,y_t=q_ny_t-1+u_t,其中qn=1+c/(k_n),k_n=o(n),c为一非零常数,{u_t}为随机扰动项序列.在允许扰动项方差无穷的条件下,构造q_n的复合分位数估计,并得到了该估计的渐近分布.最后通过数值模拟,在扰动项服从t(2)分布下,说明了该估计的稳健和有效性.     

Effect of mechanical force on domain switching in BiFeO_3 ultrathin films

Ferroelectric polarization can be switched by an external applied electric field and may also be reversed by a mechanical force via flexoelectricity from the strain gradient.In this study,we report the mechanical writing of an epitaxial BiFeO3(BFO)thin film and the combined action of an applied mechanical force and electric field on domain switching,where the mechanical force and electric field are applied using the tip of atomic force microscopy.When the applied force exceeds the threshold value,the upward polarization of the BFO thin film can be reversed by pure mechanical force via flexoelectricity;when an electric field is simultaneously applied,the mechanical force can reduce the coercive electric field because both the piezoelectricity from the homogeneous strain and the flexoelectricity from strain gradient contribute to the internal electric field in the film.The mechanically switched domains exhibit a slightly lower surface potential when compared with that exhibited by the electrically switched domains due to no charge injection in the mechanical method.Furthermore,both the mechanically and electrically switched domains exhibit a tunneling electroresistance in the BFO ferroelectric tunnel junction.     

Analysis of Natural Convection During Solidification of a Pure Metal

A numerical study of solidification of gallium in a closed cavity is presented and the influence of natural convection on phase change is investigated.

The mathematical formulation is based on the enthalpy-porosity method, while the equations are discretized on a fixed grid by means of a finite volume technique. Advancing in time is obtained using the SIMPLE algorithm, while the solution of the elliptic equation for pressure correction is obtained by means of a preconditioned BI-CGStab method.

As a test case a square cavity with Ra ranging from 4.68 × 10³ to 9.36 × 10⁵ is adopted. Results will be presented in terms of streamlines, isotherms, solid-liquid interface position and Nu and compared, when possible with available data.     

A new formulation of regularized meshless method applied to interior and exterior anisotropic potential problems

This paper proposes a new formulation of regularized meshless method (RMM), which differs from the traditional RMM in that the traditional formulation generates the diagonal elements of influence matrix via null-field integral equations, while our new one directly employs the boundary integral equations at the domain point to evaluate the diagonal elements. We test the present RMM formulation to two-dimensional anisotropic potential problems in finite and infinite domains in comparison with the traditional RMM. Numerical results show that the present RMM sharply outperforms the traditional RMM in the solution of interior problems, while the latter is clearly superior for exterior problems. A rigorous theoretical analysis of circular domain case also corroborates such numerical experiment observations and is provided in the appendix of this paper.     

Steepest-descent method-based adaptive frequency domain equalizer in coherent optical orthogonal frequency division multiplexing with quadrature phase shift keying modulation

An adaptive frequency domain equalizer (A-FDE) in quadrature phase shift keying-coherent optical-orthogonal frequency division multiplexing (QPSK-CO-OFDM) system is proposed in this paper. A-FDE uses steepest descent method to search the optimal equalization parameters. And through applying the adaptive control factor (ACF) to monitor the state of A-FDE, the interference from phase noise (PN) and chromatic dispersion (CD) can be mitigated. The numerical simulation shows that the performance of A-FDE has a remarkable improvement on combating PN and CD comparing with the conventional decision-directed equalizer (DDE). And the A-FDE can achieve the forward-error-correction (FEC) threshold in noisier scenario. Furthermore, because the calculation of ACF only bases on valid data instead of pilot symbols (PSs), A-FDE has low PS overhead merit.